Morphometry and Morphostructural Studies of the Parts of Gola River and Kalsa River Basins,Chanphi-Okhalkanda Region,Kumaun Lesser Himalaya,India     

Lal. Kumar  Joshi  G.  Agarwal  K. K. 《Geotectonics》2020,54(3):410-427

Geotectonics - Study of morphometric parameters such as stream length (Lu) and stream length ratios (Rl), bifurcation ratio (Rb), drainage density (D), form factor (Rf), circularity ratio (Rc),...  相似文献   

An extreme wave event in eastern Yucatán,Mexico: Evidence of a palaeotsunami event during the Mayan times     

Javier Lario  Chris Spencer  Teresa Bardají  Ángel Marchante  Victor H. Garduño-monroy  Jorge Macias  Sergio Ortega 《Sedimentology》2020,67(3):1481-1504

The Yucatán Peninsula, Mexico, has typically been considered a tectonically stable region with little significant seismic activity. The region though, is one that is regularly affected by hurricanes. A detailed survey of ca 100 km of the eastern Yucatán and Cozumel coast identified the presence of ridges containing individual boulders measuring >1 m in length. The boulder ridges reach 5 m in height and their origin is associated with extreme wave event activity. Previously modelled tsunami waves from known seismically active zones in the region (Muertos Thrust Belt and South Caribbean Deformed Belt) are not of sufficient scale in the area of the Yucatán Peninsula to have produced the boulder ridges recorded in this study. The occurrence of hurricanes in this region is more common, but two of the most destructive (Hurricane Gilbert 1988 and Hurricane Wilma 2005) produced coastal waves too small to have created the ridges recorded here. In this paper, a new tsunami model with a source area located on the Motagua/Swan Island Fault System has been generated that indicates a tsunami event may have caused the extreme wave events that resulted in the deposition of the boulder ridges.  相似文献   

Digital mapping of coastal boulders – high-resolution data acquisition to infer past and recent transport dynamics     

Fabian Boesl  Max Engel  Rodrigo C. Eco  JaN B. Galang  Lia A. Gonzalo  Francesca Llanes  Eva Quix  Helmut Brückner 《Sedimentology》2020,67(3):1393-1410

Coastal boulder fields provide clues to long-term frequency-magnitude patterns of coastal flooding events and have the potential to play an important role in coastal hazard assessment. Mapping boulders in the field is time and labour-intensive, and work on intertidal reef platforms, as in the present study, is physically challenging. By addressing coastal scientists who are not specialists in remote sensing, this contribution reports on the possibilities and limitations of digital applications in boulder mapping in Eastern Samar, Philippines, where recent supertyphoons Haiyan and Hagupit induced high waves, coastal flooding and boulder transport. It is demonstrated how satellite imagery of sub-metre resolution (from Pléiades and WorldView-3 imagery) enables efficient analysis of transport vectors and distances of larger boulders, reflecting variation in latitudes of both typhoon tracks and approaching angles of typhoon-generated waves. During the investigated events, boulders with a-axes of up to 8 m were clearly identified to have been shifted for up to 32 m, mostly along the seaward margin of the boulder field. It is, however, hard to keep track of smaller boulders, and the length of a-axes and b-axes including their orientation is often impossible to map with sufficient accuracy. Orthophotographs and digital surface models created through the application of an unmanned aerial vehicle and the ‘Structure from Motion’ technique provide ultra-high-resolution data, and have the potential to not only improve the results of satellite image analysis, but also those from field mapping and may significantly reduce overall time in the field. Orthophotographs permit unequivocal mapping of a-axes and b-axes including their orientation, while precise values for c-axes can be derived from the respective digital surface models. Volume of boulders is best inferred from boulder-specific Structure from Motion-based three-dimensional models. Battery power, flight speed and altitude determine the limits of the area covered, while patches shielded by the boulders are difficult to resolve. For some tasks, field mapping remains mandatory and cannot be replaced by currently available remote sensing tools: for example, sampling for rock type, density and age dating, recording of lithological separation of boulders from the underlying geological unit and of geomorphic features on a millimetre to decimetre-scale, or documentation of fine-grained sediment transport in between the boulders in supratidal settings. In terms of future events, the digital products presented here will provide a valuable reference to track boulder transport on a centimetre to decimetre-scale and to better understand the hydrodynamics of extreme-wave events on a fringing reef coastline.  相似文献   

Sediment transfer in an extremely low-gradient,low-relief and highly buffered system: Darwin Harbour catchment,northern Australia     

M. Nawaz  R. Wasson 《Australian Journal of Earth Sciences》2020,67(3):351-359

Abstract

Sediment yields from and sediment transfer within catchments of very low relief and gradient, which make up about 50% of Earth’s surface, are poorly documented and their internal sediment dynamics are poorly known. Sediment sources, their proportionate contributions to valley floors and sediment yield, and storage are estimated using fallout radionuclides ²¹⁰Pb_(ex) and ¹³⁷Cs in the catchments that drain into Darwin Harbour, northern Australia, an example of this understudied catchment type that appears to be globally at the extreme end of this category of catchments. Unchannelled grassy valley floors (dambos, or seasonal wetlands) trap ～90% of the sediment delivered from hillslopes by sheet and rill erosion. Further down valley, small channels transport ～10% of the sediment that escapes from the dambos, and the remaining sediment comes from erosion of the channels. In this case, the fractional sediment storage is very high as a result of the existence of dambos, a landform that depends for its existence on low gradients.  相似文献   

Zircon U–Pb geochronology,whole-rock geochemical,and Sr–Nd–Pb isotopic constraints on the timing and origin of Permian and Triassic mafic dykes from eastern North China Craton     

Liu  Shen  Feng  Caixia  Fan  Yan  Chen  Xiaoqing  Yang  Yuhong  Zhao  Huibo  Coulson  Ian M. 《中国地球化学学报》2020,39(6):862-886

Acta Geochimica - This work reports an important episode of extensional, mafic magmatism that impacted the North China Craton (NCC) during the Permo-Triassic and influenced the evolution of this...  相似文献   

Evaluating new fault-controlled hydrothermal dolomitization models: Insights from the Cambrian Dolomite,Western Canadian Sedimentary Basin     

Ardiansyah Koeshidayatullah  Hilary Corlett  Jack Stacey  Peter K. Swart  Adrian Boyce  Hamish Robertson  Fiona Whitaker  Cathy Hollis 《Sedimentology》2020,67(6):2945-2973

Fault-controlled hydrothermal dolomitization in tectonically complex basins can occur at any depth and from different fluid compositions, including ‘deep-seated’, ‘crustal’ or ‘basinal’ brines. Nevertheless, many studies have failed to identify the actual source of these fluids, resulting in a gap in our knowledge on the likely source of magnesium of hydrothermal dolomitization. With development of new concepts in hydrothermal dolomitization, the study aims in particular to test the hypothesis that dolomitizing fluids were sourced from either seawater, ultramafic carbonation or a mixture between the two by utilizing the Cambrian Mount Whyte Formation as an example. Here, the large-scale dolostone bodies are fabric-destructive with a range of crystal fabrics, including euhedral replacement (RD1) and anhedral replacement (RD2). Since dolomite is cross-cut by low amplitude stylolites, dolomitization is interpreted to have occurred shortly after deposition, at a very shallow depth (<1 km). At this time, there would have been sufficient porosity in the mudstones for extensive dolomitization to occur, and the necessary high heat flows and faulting associated with Cambrian rifting to transfer hot brines into the near surface. While the δ¹⁸O_water and ⁸⁷Sr/⁸⁶Sr ratios values of RD1 are comparable with Cambrian seawater, RD2 shows higher values in both parameters. Therefore, although aspects of the fluid geochemistry are consistent with dolomitization from seawater, very high fluid temperature and salinity could be suggestive of mixing with another, hydrothermal fluid. The very hot temperature, positive Eu anomaly, enriched metal concentrations, and cogenetic relation with quartz could indicate that hot brines were at least partially sourced from ultramafic rocks, potentially as a result of interaction between the underlying Proterozoic serpentinites and CO₂-rich fluids. This study highlights that large-scale hydrothermal dolostone bodies can form at shallow burial depths via mixing during fluid pulses, providing a potential explanation for the mass balance problem often associated with their genesis.  相似文献   

Structure of Prominences with Normal and Inverse Polarities     

Korolkova  O. A.  Solov’ev  A. A. 《Geomagnetism and Aeronomy》2019,59(7):858-863

Geomagnetism and Aeronomy - Based on the measurements of their magnetic fields, solar prominences can be divided into two types: filaments with normal (N) or inverse (I) polarity. In an N-type...  相似文献   

Research note: deblended-data reconstruction using generalized blending and deblending models     

Tomohide Ishiyama  Mohammed Y. Ali  Satoshi Ishikawa  Gerrit Blacquiere  Shotaro Nakayama 《Geophysical Prospecting》2019,67(7):1852-1866

We introduce a concept of generalized blending and deblending, develop its models and accordingly establish a method of deblended-data reconstruction using these models. The generalized models can handle real situations by including random encoding into the generalized operators both in the space and time domain, and both at the source and receiver side. We consider an iterative optimization scheme using a closed-loop approach with the generalized blending and deblending models, in which the former works for the forward modelling and the latter for the inverse modelling in the closed loop. We applied our method to existing real data acquired in Abu Dhabi. The results show that our method succeeded to fully reconstruct deblended data even from the fully generalized, thus quite complicated blended data. We discuss the complexity of blending properties on the deblending performance. In addition, we discuss the applicability to time-lapse seismic monitoring as it ensures high repeatability of the surveys. Conclusively, we should acquire blended data and reconstruct deblended data without serious problems but with the benefit of blended acquisition.  相似文献   

Active channel width as a proxy of sediment supply from mining sites in New Caledonia     

Mélanie Bertrand  Frédéric Liébault 《地球表面变化过程与地形》2019,44(1):67-76

Although the channel morphology of upland fluvial systems is known to be strongly controlled by sediment supply from hillslopes, it is still difficult to isolate this effect from the other controlling factors of channel forms, such as the sediment transport capacity (depending notably on the size of the catchment) and local conditions (e.g. confinement, riparian vegetation, valley-floor slope). The rivers in New Caledonia offer an interesting field laboratory to isolate the morphological effect of contrasted sediment supply conditions. Some of these rivers are known to be highly impacted by the coarse sediment waves induced by the mining of nickel deposits that started in the early 1870s, which was particularly intensive between the 1940s and 1970s. The propagation of the sediment pulses from the mining sites can be traced by the presence of wide and aggraded active channels along the stream network of nickel-rich peridotite massifs. A first set of 63 undisturbed catchments in peridotite massifs distributed across the Grande Terre was used to fit a classic scaling law between active channel width and drainage area. A second set of 86 impacted sites, where the presence of sediment waves was clearly attested by recent aerial imagery, showed systematically wider active channels, with a width ratio around 5 (established from the intercept ratio of width–area power laws). More importantly, this second set of disturbed sites confirmed that the residual of active channel widths, computed from the scaling law of undisturbed sites, is statistically positively related to the catchment-scale relative area of major mining sediment sources. It is therefore confirmed that the characterization of sediment supply conditions is crucial for the understanding of spatial patterns of active channel width, and this should be more thoroughly considered in morphological studies of rivers draining environments with contrasted geomorphic activities on hillslopes. © 2018 John Wiley & Sons, Ltd.  相似文献   

Temporal and spatial variation of soil erosion in wooded rangelands of southwest Spain     

Judit Rubio-Delgado  Susanne Schnabel  Álvaro Gómez-Gutiérrez  Joaquín Francisco Lavado-Contador 《地球表面变化过程与地形》2019,44(11):2141-2155

Changes in land use are common in Mediterranean areas and are reported as having produced changes in the intensity of soil erosion. Dehesas are rangelands with a disperse tree cover, widespread in the south-western part of the Iberian Peninsula and similar ecosystems are also common in other areas with a Mediterranean climate. The aim of the present study is to analyse temporal and spatial variations of soil erosion rates estimated along three hillsides, located in two farms (Buitrera and Parapuños) in southwest Spain. To understand the temporal variation, soil erosion rates were studied in light of land use-management changes that took place during the last few centuries. Results indicate very low erosion rates prior to the 18^th century in both farms. In Buitrera, a first increase of soil loss rates was identified during the period 1831-1897, amounting to 7.4 t ha^-1 y^-1. A further increase took place during the 20^th century, reaching a mean erosion rate of 29.1 t ha^-1 y^-1. In Parapuños, data points to a significant increase from 1881 onwards, with an estimated mean erosion rate of 18.5 t ha^-1 y^-1. Those increases were presumably connected with an intensification of land use, such as cultivation and excessive livestock populations. Regarding spatial variation, the bare surface and the erosive power of run-off along the hillsides accounts for 76% of the soil erosion rates dispersion. At a local scale, the variability of erosion rates could not be explained, because of (i) uncertainty related to the micromorphology of the past soil surface and (ii) the role of tillage erosion in the past. However, the results obtained offer valuable data on the temporal and spatial variation of erosion rates in dehesas at the hillslope scale and a similar approach could be used for other rangelands with a disperse tree cover. © 2019 John Wiley & Sons, Ltd.  相似文献